Bathroom & Wet Room pump systems

Plancofix

Plancofix

Our PTS/Jung Plancofix is the first fully-fledged floor drainage pump for floor-level showers.

Whenever you need to install a floor-level shower in an existing building but the gradient to the existing drain is inadequate, the Plancofix can simply pump the shower water into the nearest drain.

The Plancofix is set into the existing bathroom floor – an opening of approx. 40 x 40 x 12 cm is required. The Plancofix can then be tiled over and works almost invisibly beneath your feet as you relax in the shower.

For further information & downloads on the Plancofix:

Plancofix

Plancofix Plus

 

Plancofix Plus

 

The Plancofix plus needs even less depth for installation. Why is this “less” a “plus”?

Where the floor construction height is restricted, every centimetre saved may be crucial. The Plancofix plus needs a depth of only 8 cm, saving 1,5 whole cm compared to the Plancofix.

If a further installation depth reduction is required, the moulded insulating tray can be removed to save one more centimetre.

For further information & downloads on the Plancofix Plus:

Plancofix Plus

Plancofix Line

 

The Plancofix Line comes into your house with a 1.20 m long shower channel. With a simple cut the channel can be shortened to the individual size of your shower.

The advantage of the gutter is obvious: the tiler only has to create a slope on one side in the direction of the gutter. Complicated tile cuts to lead the water into the punctiform drain are no longer necessary.

The user of the shower no longer stands on the floor drain, as it is usually installed inconspicuously close to the wall.

For further information & downloads on the Plancofix Line:

Plancofix Line